What We Do
Core Services
Interior Metal Framing · Exterior Framing · Drywall · Shaft Walls · Rated Assemblies · Firestopping · Door & Hardware · OSHA Safety
Self-Performed.
Every Scope.
AVC Contractor Corp performs 100% of its work with in-house field crews and supervision. No subcontracting. Every scope listed below is executed by our own trained labor — giving general contractors and owners direct accountability on every project.
Our crews are experienced across all phases of multifamily interior construction, from initial framing through final hardware installation. We work in occupied buildings, ground-up developments, HPD/HDC projects, and everything in between.
Self-Performed
Field Crews
Metro Area
Service Lines
01 / 04
Framing Systems
AVC performs all types of metal framing — from light-gauge interior partitions to heavy structural cold-formed systems for high-rise and mid-rise multifamily construction.
Interior Metal Framing
Light-gauge steel stud and track systems for interior partition walls across all multifamily typologies. AVC crews are experienced in complex layouts, high-wall conditions, and tight schedule environments.
- Light-gauge 25–12 ga. steel studs
- All heights and configurations
- Coordination with MEP rough-in
- Multifamily and mixed-use applications
Exterior Heavy Gauge Framing
Structural exterior wall framing with heavy-gauge cold-formed steel for mid-rise and high-rise applications. Engineered for wind load, thermal performance, and code compliance.
- 12 ga. and heavier exterior systems
- Wind-load engineered assemblies
- Continuous insulation compatibility
- Coordination with curtain wall and cladding
Structural Cold-Formed Metal Framing
Load-bearing SCFM systems for complex structural configurations including bearing walls, floor systems, and roof framing. Engineered and installed per stamped drawings.
- Load-bearing wall systems
- Floor and roof framing
- Engineered per stamped drawings
- Coordination with structural engineer
02 / 04
Drywall & Sheathing
Full-scope drywall installation and taping, shaft wall assemblies, and exterior sheathing systems — executed by in-house crews with the experience to perform on large-scale multifamily projects.
Drywall Installation & Taping
Complete drywall hang, finish, and tape across large-scale residential projects. AVC crews handle all board types, thicknesses, and finish levels from Level 1 through Level 5.
- All board types and thicknesses
- Level 1–5 finish
- Large-scale multifamily volume
- Coordination with paint and flooring trades
Shaft Wall Assemblies
Elevator, mechanical, and stair shaft enclosures using rated shaft wall systems. Installed per UL listings and NYC Building Code requirements.
- Elevator and mechanical shafts
- UL-listed assemblies
- NYC Building Code compliance
- Coordination with elevator and MEP contractors
Exterior Gypsum Sheathing
Weather-resistant gypsum sheathing systems for exterior wall assemblies. Installed over metal framing with proper fastening, taping, and flashing integration.
- DensGlass and equivalent products
- Proper fastening per manufacturer
- Tape and joint treatment
- Flashing and WRB coordination
Plywood & Specialty Sheathing
Structural and specialty sheathing systems for demanding envelope conditions, including plywood, OSB, and composite panels for high-load or specialty applications.
- Structural plywood and OSB
- Composite and specialty panels
- High-load applications
- Coordination with structural requirements
03 / 04
Assemblies & Sealing
Rated assemblies, firestopping, acoustic sealing, and specialty ceiling systems — the critical scope that protects occupants and satisfies code inspectors.
Rated & Non-Rated Assemblies
Fire-rated wall and ceiling assemblies meeting UL listings and NYC Building Code. AVC installs 1-hour, 2-hour, and higher-rated assemblies across all multifamily applications.
- 1-hr, 2-hr, and higher ratings
- UL-listed assemblies
- NYC Building Code compliance
- Inspection-ready documentation
Firestopping & Acoustic Sealing
Through-penetration firestopping and acoustic isolation for code compliance and occupant comfort. Installed per UL system listings with proper documentation for inspections.
- Through-penetration firestopping
- Perimeter joint sealing
- Acoustic isolation systems
- UL system documentation
Ceilings & Specialty Installations
Suspended, furred, and specialty ceiling systems for residential units, corridors, and amenity spaces. AVC installs standard and custom ceiling configurations to meet design intent.
- Suspended grid and drywall ceilings
- Furred and dropped ceilings
- Amenity and lobby specialty ceilings
- Coordination with lighting and MEP
04 / 04
Finishes & Safety
Door, hardware, and cabinet installation plus OSHA protection systems — the final-mile scopes that complete the interior and keep the job site safe.
Door, Hardware & Cabinet Installation
Complete door frame, hardware, and millwork installation for multifamily interiors. AVC installs hollow metal frames, wood doors, finish hardware, and base cabinets across all unit types.
- Hollow metal and wood door frames
- Finish hardware installation
- Base and upper cabinet installation
- Coordination with finish schedule
OSHA Protection Systems
Site safety support including temporary protection, guardrails, and fall prevention systems. AVC provides OSHA-compliant protection for open floor edges, stairwells, and elevated work areas.
- Temporary edge protection
- Stairwell guardrails
- Fall prevention systems
- OSHA 1926 compliance
Ready to Bid
Your Next
Project?
AVC Contractor Corp works directly with general contractors, developers, and project owners. We're ready to review your scope and provide a competitive bid for any of our service lines.